With the newer Harley-Davidson’s and their taller seat heights, have you considered lowering your front end to get better handling with your bike? If you have, you need a kickstand that will work and keep your bike upright safely because the stock kickstand will lean the bike to the right too much and it will want to fall over. Pingel Enterprise, Inc. has designed 2 kickstand models for lowered bikes with a model for 1” lowered and one for 2” lowered bikes. These kickstands are handcrafted in the USA, made of steel, tig welded and beautifully hand polished and then chrome plated. They are deigned to mount to the stock mount and will accept the stock spring. Models have a full surface foot contact area and have easy accessibility with stock and oversized primary covers. Pingel also has a stock replacement model which has a lesser lean angle to make it easier to get the heavy bike off its kickstand. To go with this, Pingel also sells rear lowering kits.
For more information, please contact Pingel Enterprise Inc. at 608-339-7999 or at pingelonline.com