$295 (manual) $595 (electronic)
Bad Dad’s Original Hide-a-Plate is a simple way to hide your bike’s license plate. This product features a rotational hinge for moving your bike’s plate and is available in both a manual and electronic version. Once deployed, the bottom of the license plate sits approximately 5 inches off the ground providing clearance for curbs, bumps, etc. Bad Dad’s Original Hide-a-Plate is available in any of Bad Dad’s stretched rear fenders. The plate frame is wired into your bagger’s switched power so it automatically illuminates your license plate whenever the bike is switched to the “on” position. The fully electronic version is also wired to the bike’s power switch and automatically extends the plate when the bike is turned on.
Power Intake X-Force Air Filter System
This complete bolt-on kit comes with a backing plate, filter, and mounting hardware. The patented X-Wing design offers more power and quicker acceleration. It’s an oil-free filter with washable filter media made from a poly-cotton blend. You can get it for your ’08-11 Harley bagger in matte black or silver finish. The unit accepts stock filter covers.
Tank and Side Cover Kit
Made for ’01-11 Harley-Davidson baggers, this kit gives a bike the look of a one-piece profile between the gas tank and side covers. The kit covers the existing tank and replaces the stock side covers. It’s shipped as a raw fiberglass composite set.
Custom Paint Service
Contact for Pricing
Curly’s is a full-service custom paint and body shop. It can match your existing paintwork or give your bike a totally new look. It also offers airbrushing. Curly’s refinishes not only Harley-Davidsons but Metric machines as well.
Buffalo Saddlebag Bars with Guards
A damaged or scratched saddlebag can pretty quickly ruin your mood and the look of your ride. Drag Specialties bag rail system is built to keep that from happening to ’08-11 bagger saddlebags. It incorporates 1.25-inch–diameter saddlebag bars with the added strength and style of two 1-inch rear guards that wrap around the back of the bags. They’re made of structural steel tubing and are finished with chrome or a black powdercoat.
Call your Drag Specialties dealer
Batwing Ape Handlebars
Harley’s Batwing Apes are shaped to place your hands just above the stock Batwing fairing found on its Electra Glide-based motorcycles. The 12-inch-high handlebars feature a tall stance and minimal pullback. They’re finished in chrome or satin black, are 1 inch in diameter, and accept internal wiring. They fit ’09-later Electra Glide, Street Glide, and Trike models (except Electra Glide Ultra Limited and CVO models). All models require the separate purchase of additional components for installation, and do not fit with heated hand grips.
Call your Harley-Davidson dealer
Hill Country Customs
23-inch Wheel Installation Kit
This installation kit from Hill Country improves handling and looks when installing a 23-inch front wheel on ’97-later Harley Touring models. This kit includes a raked HHI triple tree kit that is 3 degrees over stock rake, Hill Country’s own chrome-plated fender lift brackets, and completely assembled OEM chrome fork legs with Hill Country’s custom modifications for the wheel. Hill Country Customs uses this kit on its own bikes. The shop has discovered a way to do the job properly without cutting the bike frame. The kit works with the stock fender.
This seven-spoke design features twisting spokes and deep 3D machine work. These billet wheels come with a chrome finish in sizes ranging from 16 to 23 inches. Matching rotors are also available. You can also buy these wheels as part of a package deal that includes rotors and tires. Fitments are available for all stock Harleys and customs.
The new PrimeApes bars are designed to fit Harley-Davidson Batwing fairing models. LA Choppers PrimeApes accommodate both electronic (throttle-by-wire) and cable throttles and are drilled for internal wiring. Bar thickness is 1.25-inch with a 1-inch diameter clamping area. PrimeApes are available in chrome and gloss black powdercoat finishes.
Northern Michigan Leather
Leather Fairing Bra
Contact for Pricing
Northern Michigan Leather gives you another option for personalizing your Bagger. Its Leather Fairing cover is a tight-fitting piece of heavy leather that is applied with no glue or visible fasteners. It can be embossed with almost anything that the customer can dream of and comes in many different colors.
Easy Shift Kit for Baggers
Pingel’s Easy Shift Kits for the ’87-11 Harley-Davidson FL models electronically suspends the ignition system while simultaneously shifting the transmission, allowing smooth gear shifts up or down at the push of a button. Clutch use is eliminated except for starting and stopping. The unit works for normal riding or full-throttle shifting and the ability to clutch and shift normally is retained. The unit enables touring riders to spend more time enjoying the ride instead of shifting. Each kit contains Pingel’s Slim Line dual-button handlebar bracket with polished finish, miniature solid-state control modules, a wiring harness, a chromed shift cylinder, a polished mounting bracket, and complete instructions.
430 Shocks for Kawasaki Vaquero
Contact for Pricing
The new Kawasaki Vaquero has already caught the eye of more than a few hardcore riders and customizers as well as the suspension go-to guys at Progressive. Renowned for its line of high-performance motorcycle shocks and fork spring kits, now they’ve given the stylish Vaquero the one thing it lacked—a lower stance. Not only does it sit an inch lower, it also utilizes a high-pressure gas mono tube design with deflective disk damping for high-performance ride control. Threaded preload adjusters allow for tool-less adjustment of ride quality and changing loads. Smooth lines and a polished chrome body complement machined aluminum spring perches. They are available in chrome or contrast-cut black anodized finish to match the look of your bike.