(1.)The Hogg Chopps Lowers come painted and ready to install complete with all hardware. The Making Of An Ultra KingPart EightIn this month's installment of the ever evolving `97 Road King, we call "The Lonely King," we decided to take the bike one-step further and outfit it with a set of Hogg Chopps lowers and a Harley-Davidson chopped tour pack. Designed for Road King owners, the Hogg Chopps Lowers are computer-designed to cover the maximum amount of space from the floorboard to the windshield and stream the air around the rider. The Lowers are constructed from ABS plastic and were painted in-house at Hogg Chopps to match our FLHR. After cruising the handy H-D Parts and Accessories catalog, we ordered up a matching Vivid Black Chopped Tour-Pack with all the trimmings. The installation of both the Hogg Chopps and the Tour-Pak require basic tools that even a beginer-level mechanic would not have a problem carrying out. (2.)We measured and marked 6 1/2 inches out from the center bolt of the engine guard on each side to find the correct mounting location for each side of the Hogg Chopps Lowers.(2.)We measured and marked 6 1/2 inches out from the center bolt of the engine guard on ea (3.)We then installed the rubber-coated P-clamps over the engine guard and loosely installed all the hardware in the proper locations.(3.)We then installed the rubber-coated P-clamps over the engine guard and loosely install (4.)After measuring the Lowers and getting them in the final desired location, we checked clearances between the fork and fairing then tightened all hardware to specs.(4.)After measuring the Lowers and getting them in the final desired location, we checked (5.)The detachable Tour-Pak requires docking hardware to be installed on the bike before it can be safely installed.(5.)The detachable Tour-Pak requires docking hardware to be installed on the bike before i (6.)We now Install the Tour-Pak rack to the Tour-pak with the hardware provided in the kit.(6.)We now Install the Tour-Pak rack to the Tour-pak with the hardware provided in the kit (7.)The installation of the backrest took only a few minutes, requiring only six bolts to be attached to the Tour-Pak.(7.)The installation of the backrest took only a few minutes, requiring only six bolts to (8.)The Tour-Pak and rack was then slipped into the docking hardware and some final adjustments were made.(8.)The Tour-Pak and rack was then slipped into the docking hardware and some final adjust (9.)The H-D Tour-Pak and Hogg Chopps Lowers looked right at home on the newly crowned Ultra Lonely King(9.)The H-D Tour-Pak and Hogg Chopps Lowers looked right at home on the newly crowned Ultr PartsHarley-DavidsonChopped Tour-PackPN 53111-96DH$749.95Chopped Tour-PakBackrest PadPN 52898-98$124.95Detachable Two-UpTour-Pak RackPN 53276-04$169.95Detachable Tour-Pak Docking Hardware KitPN 53988-07$54.95Fitted Chopped Tour-Pak LinerPN 53285-06$74.95Chopped Tour-Pak LinerPN 91783-96$35.95Tour-Pak Lid Organizer53249-01B$89.99Hogg ChoppsPainted Hogg Chopps Lowers$399.00 SOURCES Hogg Chopps hoggchopps.com Harley-Davidson Motor Company By Jeff G. Holt Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
