The Pro Pad floorboard extension kit is a nice and simple parts pack that really aids in comfort on our H-D baggers. This kit provides .08 inch more room away from the exhaust pipe on the right and shifters on the left of the bike, providing full floorboard usage instead of just the outer half. The kit comes with machined and anodized aluminum spacers and correct-length stainless steel bolts. Who would have thought that less than an inch would make such dramatic difference in our riding luxury? B (1.)Here's a "before" photo showing how close the floorboards are to the exhaust. Three quarters of an inch!(1.)Here's a "before" photo showing how close the floorboards are to the exhaust. Three qu (2.)We pull off the right floorboard and add the supplied spacers and longer bolts. (3.)Here's a shot of one of the spacers being installed. (4.)We now do the same with the left side, adding the machined extension, spacer and longer bolts.(4.)We now do the same with the left side, adding the machined extension, spacer and longe (5.)With all of the bolts torqued to spec, you can now see just how much room the kit has added.(5.)With all of the bolts torqued to spec, you can now see just how much room the kit has Say hello to the whole floorboard and good-bye to cramped hips. PARTS:FLHT floorboard extension kit(PN FB-EXT, MSRP $39.95) SOURCES Pro Pad thepropad.com By Jeff G. Holt Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
