|
Fit the rest of the gaskets, assemble the covers, and torque all the mounting screws in the order as described in the service manual to 108-120 lb/in. If you don't have a manual, start the torque sequence in the middle of the cover, alternating top to bottom, then work your way to the front of the cover, and then do the back half. The two long inspection cover screws are last to be torqued. Don't forget the primary oil. We did, and we had to remove the clutch cover and fill the primary to the bottom edge of the clutch spring, (as per the service manual). View Related Article
|
|