Jerry's Oil Filter - Quick Change Oil System Kit

Oil is the lifeblood of any engine. It keeps the internal engine parts cool, clean and lubricated. Clean oil does this job better than dirty oil. To insure an adequate supply of clean oil for the engine, it should be passed through some type of filter that will trap all of the junk that somehow finds its way inside the engine or oil tank. Not all oil filters are created equal. The same holds true for oil filter mounts. All big twin Harleys produced over the past few years have an oil filter mount built into or bolted to the front of the engine cases. While this is a nice, compact mounting system, some riders may want a remote oil filter mount, where the filter itself is out in the airstream adding to the cooling of the oil. For those kind of riders, we have a remote oil filter mount from Jerrys Rigs Systems. It consists of a remote filter mount that clamps onto a framerail of your choice, as well as an adapter, fittings and hose to complete the kit. A new oil filter for your model engine and a quart of oil is all that's needed for installing the kit. This is unless, of course, you have planned the installation of the remote oil filter kit at a scheduled oil change. On our end, we didn't have one scheduled. Once the kit was installed, we cleaned up the oil on the cases and topped off the oil in the tank.

The whole job took about an hour with handtools and an oil filter wrench.