There is no better way to both set your bike apart and get a better fit than to change the stock bars on your bike. Whether it be low, wide, short or sky high, there is an off-the-shelf handlebar that can suit your needs. Currently there are hundreds of handlebars to better fit you to your bagger, so we decided to aid in your search and show you some of the latest and greatest bars manufactured today.
$204.69 Call your dealer
The Fat Bars are 1 1/4-inch thick and have a smooth swaged design. The handlebars are proudly made in the USA and are predrilled, dimpled, and knurled for the internal wiring. The Fat Bars are available chrome plated or with a black powdercoated finish.
Custom Cycle Controls
$2,395 (866) 438-2129
An all-in-one kit, CCC's hidden fluid reservoirs with internal hoses, cables, and wires give your bike a smooth look, yet maintain complete stock hand control functions. Many styles are available including drag bars, ape hangers, and anything in between.
Call For Price (888) 367-1871
With a height of 13-inches and lower compound bend, the Bagger Bar is made for both metric and American full-fairing touring bikes. The bars are slotted and drilled for easy internal wiring and are available chrome plated or powdercoated.
$279.95 Call your dealer
These Drag Specialties Buffalo handlebars are made for '08-09 Touring models with throttle-by-wire controls. They are show chromed, knurled, drilled, and machined for internal wiring. They accept stock H-D controls and handlebar clamps and are made in the USA.
19 1/2-inch Apehangers
$259.95 (909) 986-8507
These tall bars are made of 1 1/4-inch cold rolled steel that are TIG welded to A-1 military specifications and chrome plated. The angles of the bars at the handgrips are designed to take pressure off the shoulders to give a much more relaxed ride.
Bag Drag Handlebar
$325 (714) 432-9000
Stepping away from the ordinary, the Carlini Bag Drag bar is a 1 1/2-inch diameter bar with 6-inch rise that is 34-inches wide with 13-inches of pull back. These bars will set your bike apart and look good doing it. The bars are available chrome plated or black powdercoat.
Fat Ape Hanger
$145.95 (952) 758-9523
Specially designed for models with electronic throttle-by-wire sensor unit, these bars feature a 1 1/4-inch diameter with a 1-inch knurled center mounting section and 1-inch inch grips. The clamping width is 5 1/2-inches to accommodate a 1-piece bar clamp and the bars are pre-drilled for internal wiring.
Road Glide Handlebar
$199.95 (866) 999-HELL
These bars are bent up especially for '98-09 Road Glide models and feature a 1 1/4 inch diameter. The bars accept H-D throttle-by-wire system as well as ABS systems and are available in chrome or black powdercoat.
SLAH1818 Ape Hangers
$125.00 (510) 567-4157
Designed for Harley-Davidson FLH bikes with Batwing fairings, the bars measure in at 18-inches high and 1 1/4 thick. The bars are also internally drilled, dimpled for OE controls, and triple chrome plated.
Roland Sands Designs
$359 (714) 228-8481
Inspired by RSD's Vintage ape hangers, the Convoy bar has that unmistakable RSD styling for Batwing fairing owners. The design of the Convoy bar gives the rider a slightly higher hand position than stock bars as well as a much better bend at the wrists. The bar is available in black powdercoat or chrome plated finish and is knurled and slotted for internal wiring.
Hill Country Custom Cycles
HCC Ape Hanger & Handlebar Packages
From $299.95 (512) 264-7333
Complete handlebar packages for all Harley bagger models complete with controls and pre-calculated cable lengths for your bike. HCC apehangers are available in 1, 1 1/4, and 1 1/2-inch diameters in heights ranging from 8 to 20-inches in your choice of chrome or black.
Starting at 189.95 (605) 996-3700
The Klock Werks Sameole handlebars have a bigger, beefier, and smoother look while hiding your wiring. These 1 1/4-inch thick bars are 3/4 inches wider on each side compared to stock bars. Available for '97-09 Road Glides in chrome plate, black powdercoat, and raw.
$849 (800) 625-4642
Designed for Harley-Davidson and select metric cruisers, the Horizon multi-adjustable handlebar allows you to fine-tune the exact fit by offering three-plane adjustability. The HeliBars are made from top-grade machined aluminum and are available in chrome plated or black anodized finishes.
$184.50 (321) 724-0601
These Tempest Cycles bars are constructed from 1 1/4-inch stainless steel tubing and are 1-inch wide at the grip and control areas. These handlebars mount at a 130-degree angle and are available with a centered gauge mount as an option.
Bagger Beach Bar
$224.95 (800) 337-8870
Wild 1 introduces a 14-inch ape hanger for the FLHT, FLHX, and all other bikes with Batwing fairings. These bars are proudly made in the USA, fit throttle-by-wire as well as earlier touring models, and are available show chrome plated or powedercoated.
$350 (866) 998-7275
The Bro Bars are mean looking and measure 1-inch in diameter at the grips and clamping area, but the visible area is 1 1/4-inches in diameter. The bars come dimpled as well as pre-drilled for internal wiring and are available in 12, 14, or 16-inches tall.